Pump-over fermenter
The fermenter is primarily intended for maceration of wine, but can also be used for wine storing.
The cap that forms during the fermentation of the mash is periodically poured with must, which is pumped from the lower part of the tank. The sprayer in the tank evenly sprays the must over the entire surface of the hat. A pump installed on the lower part of the tank, operated via a switch box, is used to water the mash.
It consists of a cylindric coat, conical top, flat bottom installed at an angle, legs, cooling/heating coat and a watering device.
Fermenters are made of AISI 304 material, they can also be combined with AISI 316 material or made entirely of AISI 316. The inside of the tank is shiny (BA/3D quality), which enables easy cleaning.
All welds are mechanically treated and polished.
Equipment
Basic equipment:
- top door Ø 400mm
- inlet DN 50 with plastic bung
- rectangular (mash) door on the front
- clean outlet with a ball valve
- total outlet with a ball valve
- trial tap
- digital thermometer
- cooling coat
- switch box with time regulation of watering intervals (manual or automatic setting)
- watering device with pump
- inner sieve
- legs closed
- ladder handle
- name plate
Material:
- AISI 304 (BA) - W.Nr. 1.4301 (3D)
- exterior marbled, interior polished (3d)
Additional equipment:
- oval door on the front
- rectangular door (mash) with a cogged batten
- height changeable legs
- level indicator
Specifications
| Article | Volume (L) | ø (mm) | H1 (mm) | H (mm) |
|---|---|---|---|---|
| ZV40-200 | 4.000 | 1.650 | 2.000 | 2.850 |
| ZV50-200 | 5.000 | 1.850 | 2.000 | 2.900 |
| ZV60-200 | 6.000 | 1.940 | 2.000 | 2.900 |
| ZV70-225 | 7.000 | 2.000 | 2.250 | 3.150 |
| ZV80-225 | 8.000 | 2.150 | 2.250 | 3.150 |
| ZV90-250 | 9.000 | 2.150 | 2.500 | 3.400 |
| ZV100-250 | 10.000 | 2.250 | 2.500 | 3.400 |
| ZV120-250 | 12.000 | 2.460 | 2.500 | 3.450 |
| ZV150-350 | 15.000 | 2.460 | 3.500 | 5.950 |
Available also in other volumes and dimensions, on demand.
